bcaslis
May 2, 07:03 PM
Not sure exactly what you are looking for but this is what I use:
http://www.tombihn.com/page/001/PROD/300/TB0223
http://www.tombihn.com/page/001/PROD/300/TB0223
mjstew33
Dec 15, 07:11 PM
Daedalus256, get on AIM. Maybe we could work out a deal. I'll IM you.
djsound
Mar 29, 04:04 PM
Very interesting. Thanks for the info. :) I tried to google it but I had NO idea what to look for..
AndyOrr
Apr 11, 06:52 AM
Gradients are still in, right (as asked in Doc. Brown voice)?
more...
supraja
Dec 30, 04:14 AM
Thank you for post useful information.
Jim Campbell
Feb 23, 03:33 PM
Nothing stops them from trading with you as a free-lancer� and as far as HMRC is concerned as long as you pay your taxes�
Nonetheless, I've also encountered companies whose explicit policy is to only deal with other companies, not private individuals or sole traders.
It's a daft restriction, but it's also trivially easy to set up a limited company -- the small business advisor at your local bank will probably be able to help you with it if doing it yourself through Companies House seems a bit daunting. There are definite benefits over sole trader/self-employed, not least being the fact that no-one can come after your house in settlement of trade debts!
You should absolutely look into it more�
Cheers!
Jim
Nonetheless, I've also encountered companies whose explicit policy is to only deal with other companies, not private individuals or sole traders.
It's a daft restriction, but it's also trivially easy to set up a limited company -- the small business advisor at your local bank will probably be able to help you with it if doing it yourself through Companies House seems a bit daunting. There are definite benefits over sole trader/self-employed, not least being the fact that no-one can come after your house in settlement of trade debts!
You should absolutely look into it more�
Cheers!
Jim
more...
Keebler
Mar 5, 09:56 AM
I am too new at CS5 to be of much help, but I wonder if this would be of any help to you (?):
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
Thanks AlaskaMoose. I should have mentioned this is a negative. I would definitely try your method if it was a photo.
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
Thanks AlaskaMoose. I should have mentioned this is a negative. I would definitely try your method if it was a photo.
OPTiK
Mar 13, 11:45 AM
Are you using this:
http://www.newsden.net/jailbreak-ios-4-3-with-pwnagetool-bundles-custom-firmware-7130/
I was using this guide: http://www.redmondpie.com/jailbreak-ipad-4.3-ios-final-gm-with-pwnagetool-how-to-guide/ ...but i just came across this guide that i may try out today: http://www.redmondpie.com/jailbreak-4.3-on-windows-iphone-4-3gs-ipad-ipod-touch-using-sn0wbreeze-how-to-guide/
http://www.newsden.net/jailbreak-ios-4-3-with-pwnagetool-bundles-custom-firmware-7130/
I was using this guide: http://www.redmondpie.com/jailbreak-ipad-4.3-ios-final-gm-with-pwnagetool-how-to-guide/ ...but i just came across this guide that i may try out today: http://www.redmondpie.com/jailbreak-4.3-on-windows-iphone-4-3gs-ipad-ipod-touch-using-sn0wbreeze-how-to-guide/
more...
BigAus
Mar 24, 05:14 AM
Thank you for taking steps to have this add removed. No complaints about Macrumors other than this is the most annoying internet ad I've ever seen.
iBlue
Aug 6, 01:34 PM
...
attachment (as per rules)
attachment (as per rules)
more...
SchneiderMan
Feb 9, 02:43 AM
Just thought I would share my Gun Game gameplay with you guys. I'm proud of myself after winning first place 16 times in a row :p Been playing Black Ops for under a month now.
http://www.youtube.com/watch?v=iyOOlsZcQ1o
I will update with a second gameplay later today.
http://www.youtube.com/watch?v=iyOOlsZcQ1o
I will update with a second gameplay later today.
karthi
May 3, 10:26 AM
After being down for nearly a day, it is STILL NOT available for download. I just don't like the fact that all iOS product being the slaves of iTunes. (Now it is available for windows and still not for mac, apple fix mac things first!).
I never thought of iTunes, as the most essential software for all the iOS devices. I realized it, when I deleted iTunes due to sync issues and could not find a installable copy from Apple.com or any where.
Next time, download first, before deleting for re-install. :eek:
I never thought of iTunes, as the most essential software for all the iOS devices. I realized it, when I deleted iTunes due to sync issues and could not find a installable copy from Apple.com or any where.
Next time, download first, before deleting for re-install. :eek:
more...
Mobius 1
May 5, 08:00 AM
the dude at the apple store says that if you go over capacity you will lag. And i'm like wha?
If it support 8GB, can i use all 8GB at once?
I already know if it can take 8GB
If it support 8GB, can i use all 8GB at once?
I already know if it can take 8GB
brosenz
Apr 26, 08:55 PM
OCZ PCIe SSD. 1TB storage @ 1.4GB read and write speeds.
Price? Only $4400
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227517
I've been researching some of the OCZ PCI solutions (much cheaper of course) and I doubt I will be able to boot in Mac Pro with that card, is that true ?
Price? Only $4400
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227517
I've been researching some of the OCZ PCI solutions (much cheaper of course) and I doubt I will be able to boot in Mac Pro with that card, is that true ?
more...
spillproof
Sep 8, 06:57 PM
I like to own my downloaded stuff like I would own a CD/DVD.
Bitman
Nov 4, 02:32 PM
Looking for feedback on the new 23" Aluminum Cinema Display.
Who has one?
Are you having any problems with backlighting or pink tint?
bit
Who has one?
Are you having any problems with backlighting or pink tint?
bit
more...
robbieduncan
Apr 24, 07:54 AM
Actually there is a malloc, it's embedded in the memcpy.
My mistake. But the underlying problem is the same: the address of returnElement is on the stack. The address of the memory the at malloced in the call to memcpy is "lost" as it is never saved into a variable. So that malloced memory is leaked.
But, if I understand you correctly, the act of copying from the heap to the stack has the same effect of free()?
No. Absolutely 100% not. You have allocated space on the heap with the malloc. The malloc returned the address for you to free later. You did not save this address so cannot call free but that is OK as memcpy also returns the destination address (so as you can put the memcpy and malloc in one line like you have). But you fail to save the address their, instead dereferencing the pointer and saving that value in a variable. So at this point the malloced space on the heap is leaked. This is a problem. The space you allocated on the stack for the double is fine: it will get cleaned up for you.
The solution is to split this into two lines. You need to have a void * pointer variable that you store the return from memcpy in. You can then dereference and cast the that into returnElement. And finally free the void * pointer returned from memcpy.
My mistake. But the underlying problem is the same: the address of returnElement is on the stack. The address of the memory the at malloced in the call to memcpy is "lost" as it is never saved into a variable. So that malloced memory is leaked.
But, if I understand you correctly, the act of copying from the heap to the stack has the same effect of free()?
No. Absolutely 100% not. You have allocated space on the heap with the malloc. The malloc returned the address for you to free later. You did not save this address so cannot call free but that is OK as memcpy also returns the destination address (so as you can put the memcpy and malloc in one line like you have). But you fail to save the address their, instead dereferencing the pointer and saving that value in a variable. So at this point the malloced space on the heap is leaked. This is a problem. The space you allocated on the stack for the double is fine: it will get cleaned up for you.
The solution is to split this into two lines. You need to have a void * pointer variable that you store the return from memcpy in. You can then dereference and cast the that into returnElement. And finally free the void * pointer returned from memcpy.
jimmy.mcarthur
Apr 14, 04:01 AM
G'day all,
Over the last month or 2 my Macbook of a little over 4 years old has been experiencing some problems and I want some opinions on whether it is time to move on to a new Model.
My laptop is used for university work which mostly consists of typing documents and so on. I do a fair bit of video editing and short film making (which is now not possible as it can't even handle iMovie, even with every other program closed) and I also use it for browsing the web, iTunes and every now and then a bit of Photoshoping as i also am a hobbie photographer.
Specs: Early 2007 Macbook running Snow Leopard
2GHz Intel Core 2 Duo
3GB 667 MHz DDR2 SDRAM
320GB HDD
1st issue: Screen Spasm
2 maybe 3 times a week I'll be in the middle of something and this screen will appear accompanied by a flickering noise and the only way of stopping is to hold and shutdown the computer. Any ideas??
http://i1142.photobucket.com/albums/n618/jimmymac9588/IMG_0592.jpg
2nd Issue: Freeze
The computer will freeze just like any other would and if music is on at the time the sound sounds like when your CD's skip except it doesnt stop until you shutdown. This has been occuring once or twice a week for the last month or so.
3rd issue: Sound fuzzy
Every so often i'll be listning to music or watching YouTube and the sound will skip a few times then go all fuzzy and static, there is however a reasonably quick solution to this....pause whatever ur listning/watching, leave the computer for a minute and then resume, usually works.
My big question is what will it take to fix these issues and at what cost? Is it worth the expense or will i be needing to fork out money for a new computer soon down the track either way? If i can fix these problems will I be able to continue my video making/editing or is that something that will not be possible on this laptop from this point?
Would really appreciate some assistance/advise?
Thanks for reading!
Over the last month or 2 my Macbook of a little over 4 years old has been experiencing some problems and I want some opinions on whether it is time to move on to a new Model.
My laptop is used for university work which mostly consists of typing documents and so on. I do a fair bit of video editing and short film making (which is now not possible as it can't even handle iMovie, even with every other program closed) and I also use it for browsing the web, iTunes and every now and then a bit of Photoshoping as i also am a hobbie photographer.
Specs: Early 2007 Macbook running Snow Leopard
2GHz Intel Core 2 Duo
3GB 667 MHz DDR2 SDRAM
320GB HDD
1st issue: Screen Spasm
2 maybe 3 times a week I'll be in the middle of something and this screen will appear accompanied by a flickering noise and the only way of stopping is to hold and shutdown the computer. Any ideas??
http://i1142.photobucket.com/albums/n618/jimmymac9588/IMG_0592.jpg
2nd Issue: Freeze
The computer will freeze just like any other would and if music is on at the time the sound sounds like when your CD's skip except it doesnt stop until you shutdown. This has been occuring once or twice a week for the last month or so.
3rd issue: Sound fuzzy
Every so often i'll be listning to music or watching YouTube and the sound will skip a few times then go all fuzzy and static, there is however a reasonably quick solution to this....pause whatever ur listning/watching, leave the computer for a minute and then resume, usually works.
My big question is what will it take to fix these issues and at what cost? Is it worth the expense or will i be needing to fork out money for a new computer soon down the track either way? If i can fix these problems will I be able to continue my video making/editing or is that something that will not be possible on this laptop from this point?
Would really appreciate some assistance/advise?
Thanks for reading!
theappleguy
Nov 16, 04:31 PM
PictureViewer can do it. ;)
Edit: Sorry I mean Preview. For some reason I keep remembering the good old days of Mac OS 9.:p
Edit: Sorry I mean Preview. For some reason I keep remembering the good old days of Mac OS 9.:p
cocky jeremy
Oct 28, 08:24 PM
My girlfriend saw this and made me one yesterday.. :)
Santaduck
Mar 30, 02:21 PM
this is old news by...um... by almost a month I think, but I'm glad it was posted.
it should be loads of fun, I'm glad lucasfilm approved these guys =)
it should be loads of fun, I'm glad lucasfilm approved these guys =)
macfan881
May 17, 06:53 PM
http://www.vg247.com/2010/05/17/premium-psn-plans-for-e3-reveal-to-cost-less-than-50-per-year/
sounds intresting I would love having the free PSN game a month thing I'm really looking forward to E3
sounds intresting I would love having the free PSN game a month thing I'm really looking forward to E3
Nermal
May 5, 09:10 PM
So...would these work on Verizon? Isn't that WCDMA?
No, Verizon is CDMA2000. AT&T is WCDMA in some areas and GSM in most.
No, Verizon is CDMA2000. AT&T is WCDMA in some areas and GSM in most.
victor_patv
Feb 16, 04:23 PM
I was in a lecture hall the other day with my new 17� it was fine. No weird looks andI love the extra real estate.
No comments:
Post a Comment